Welding day in the life ...

Gewoon even offtopic praten over van alles en nog wat.

Moderator: Moderators

Gebruikersavatar
Sven
Berichten: 5041
Lid geworden op: 24 sep 2008 09:13
Locatie: Arnhem
Contacteer:

Re: Welding day in the life ...

Bericht door Sven »

If you want to take people on a journey, you must lead.
350 kilo 1250x1250 aluminium portaalfrees:
http://cnczone.nl/viewtopic.php?f=8&t=13039
Beginnen met CNC? Ontwerpen, bouwen, of toch kopen?
http://cnczone.nl/viewtopic.php?f=8&t=15481
Gebruikersavatar
Weld ON
Berichten: 17
Lid geworden op: 07 feb 2021 02:48

Re: Welding day in the life ...

Bericht door Weld ON »

To : Kjelt ... ?

To: Serum , thanks mate , you hit all points ... People like to watch but they dont know how much of work/time and money you need to put in to one video .. :) Like you said ... guys you dont have to do anything , just ingore it but if you like what you see just leave comment :)

Some of parts for project you have to buy or you can make them if you have oportunity ... and i do .. so why not...So be honest 6ppl helping me

with my CNC projects , and i can just say Thank you very much guys .. :)

Sure Serun more video will come about CNC and welding ,steb by step ,just stay tune , drop me on your youtube and you will get notification , if you already did then big thanks 2 u ... And thanks for your post ... great ..lov it

To : Ballegooijen :)

To: kawarider ... Thanks
Gebruikersavatar
serum
Donateur
Berichten: 4257
Lid geworden op: 08 mar 2008 20:37
Locatie: Zwolle

Re: Welding day in the life ...

Bericht door serum »

Subbed.. Points for you for being so sportive.

Looking forward to your next upload. I can't seem to find time to upload many movies. I know it's a lot of work to put the movies together.
foto's uploaden op cnczone.nl Let op, maximale grootte is 2,5MB, geen restricties op resolutie
Gebruikersavatar
DaBit
Donateur
Berichten: 9873
Lid geworden op: 05 dec 2012 13:48
Locatie: Oss

Re: Welding day in the life ...

Bericht door DaBit »

Ah, radiators....

Creating radiators for my SV650-to-allroad conversion project out of old car heater radiators was the first time I tried aluminium welding. I don't even have a 'real' AC welder, just a DC TIG with a few modifications.

It was hard. That dirty and thin aluminium does not make a very good first aluminium welding project. I managed to make holes, I spewed droplets of aluminium around, but in the end it worked out quite well.

Afbeelding

And then the distribution piping. I thought I had done the hardest part, but welding round pipes with small diameter turned out to be not so easy either. Mind you, I still had only a quarter of a bottle or argon experience welding aluminium.

Afbeelding

It did work out well though.

Afbeelding


Brings back good memories. Thanks for that!
Gebruikersavatar
Weld ON
Berichten: 17
Lid geworden op: 07 feb 2021 02:48

Re: Welding day in the life ...

Bericht door Weld ON »

Nice job mate, if dont do every day as me then for sure can be hard , so big respect you made it .. :)
Gebruikersavatar
Weld ON
Berichten: 17
Lid geworden op: 07 feb 2021 02:48

Re: Welding day in the life ...

Bericht door Weld ON »

Part of other projecs now im building 2 welding Tables , 1.5x0.8m and 2x1m / 15mm ,

step by step how to point and start to build your own Welding table .. :)

https://youtu.be/mEBxAMMr5HA

Afbeelding
Gebruikersavatar
Weld ON
Berichten: 17
Lid geworden op: 07 feb 2021 02:48

Re: Welding day in the life ...

Bericht door Weld ON »

Most funny thing was when i forgot to remove tape with foam what i can say my bad ..

You can se my prototype of rottary positioner and for welding i was using REHM AC/DC 180A .

https://youtu.be/wQ7zbzA1vts

Afbeelding
Gebruikersavatar
Weld ON
Berichten: 17
Lid geworden op: 07 feb 2021 02:48

Re: Welding day in the life ...

Bericht door Weld ON »

If you will watch whole video then you can learn How to PERFECTLY Sharpen Tungsten for TIG Welding easy and fast way .

Do not forget to SUBSCRIBE please and TANKS.. :)

https://www.youtube.com/watch?v=NBS09lvLwtQ&t=1s

Afbeelding
Plaats reactie