Werkstuk inladen en bed formaat instellen

Nederlandse CNC controller op basis van de usb poort of Ethernet.

Moderator: Moderators

Gebruikersavatar
audiomanics
Donateur
Berichten: 5175
Lid geworden op: 28 feb 2007 09:31
Locatie: Appelscha
Contacteer:

Re: Werkstuk inladen en bed formaat instellen

Bericht door audiomanics » 05 sep 2019 20:26

Ik home "rustig" met 75mm/sec (4,5m/min) daarbij schiet de as ongeveer 3-4mm door.. Heb 15mm ruimte dus dat gaat helemaal goed.
Kees
<klik>... euh..test... 123.... einde test... uit.<klik>

DirkSchipper
Berichten: 734
Lid geworden op: 13 sep 2010 15:28
Locatie: Utrecht
Contacteer:

Re: Werkstuk inladen en bed formaat instellen

Bericht door DirkSchipper » 05 sep 2019 22:42

Zee&Zee schreef:
05 sep 2019 20:07
Tering wat homen jullie langzaam (!)..

Als ik zelf een programma draai laat ik hem zelf als ik klaar ben altijd ff naar P1 lopen ( linksvoor ), dat scheelt, maar anderen personen vaak niet. Want in de PP heb ik een P2 toegevoegd ( andere uiterste van de tafel ) zodat de tafel vrij is na het freeswerk. Dus als daarna de machine wordt uitgezet staat hij 3200*2200 mm weg van de home positie. ( Ik weet dat je kan aanvinken ( uit eigenlijk ) dat je kan joggen voor je homed, maar ivm andere gebruikers wil ik dat liever niet )
Tja, wat maakt het nou uit of je vanuit einde-werk naar de ene uiterste plek van de machine gaat, of de andere ...
Nou de igv. 'de ene' staat hij ook uit de weg, maar ook altijd op home-positie. Da's reuze handig voor de volgende keer/persoon die hem weer aan zet. Toch?!!

Kjelt
Donateur
Berichten: 1780
Lid geworden op: 14 jun 2007 21:51
Locatie: Eindhoven

Re: Werkstuk inladen en bed formaat instellen

Bericht door Kjelt » 05 sep 2019 22:51

Mijn homing staat ook redelijk snel maar je kunt net zo goed voor je afsluit een fast move naar 10,10,10 doen. Dan is het homen de volgende dag ook zo gebeurd.

Jasper
Berichten: 496
Lid geworden op: 05 jul 2019 09:39
Locatie: Kedichem
Contacteer:

Re: Werkstuk inladen en bed formaat instellen

Bericht door Jasper » 20 sep 2019 10:56

Ik heb mijn 2e tool setter even laten varen omdat ik eindelijk wel is iets wil gaan maken.

Dus simpel doosje getekend, Z0=links voor bovenop het materiaal.
Ik home de machine en laad de file. Nul op het materiaal en hij zegt gelijk L157 machine limit violation Z-3.6308

Gebruik de Eding post processing vanaf hun website.
Line 157 staat N765 X42.864 Y132.299 Z-2.938 I0.909 J-2.701

Als ik zelf naar beneden jog tot onderkant materiaal dan gaat hij diep genoeg dus ik denk dat hij ergens een verkeerd beeld krijgt van de post processing.

Eding heeft voor mij een iets te stijlen leercurve denk ik. Betwijfel of ik wel de juiste keuze gemaakt heb en niet toch bij Planet had moeten blijven want daarmee nooit problemen gehad.

Gebruikersavatar
carlo
Berichten: 345
Lid geworden op: 04 okt 2009 12:33
Locatie: Diepenbeek België
Contacteer:

Re: Werkstuk inladen en bed formaat instellen

Bericht door carlo » 20 sep 2019 11:21

goeiemorgen

dit betekend dat je frees ergens in X Y of Z buiten het werk bereik gaat

Line 157 staat N765 X42.864 Y132.299 Z-2.938 I0.909 J-2.701
als ik lees is het niet de Z
dus kijk eens tot waar je kunt joggen in X en Y

en kijk even of je je werkstuk niet op een andere plaats kunt leggen

mvg
carlo

Jasper
Berichten: 496
Lid geworden op: 05 jul 2019 09:39
Locatie: Kedichem
Contacteer:

Re: Werkstuk inladen en bed formaat instellen

Bericht door Jasper » 20 sep 2019 11:35

Ik kan ruim om mijn werkstuk heen met X en Y. Ook Z komt er ruim boven en onder tot door mijn waste board heen. Hij zegt echt Machine Limit Violation Z.

Ik zal even op de frees pc inloggen om het bestand te kunnen toevoegen.


Gallerij Link

Hier staat hij op machine Z12.278 en werkstuk Z-33.902

Mijn werkstuk hoogte is 33.5

Jasper
Berichten: 496
Lid geworden op: 05 jul 2019 09:39
Locatie: Kedichem
Contacteer:

Re: Werkstuk inladen en bed formaat instellen

Bericht door Jasper » 20 sep 2019 11:42

Line 157 start met N765
Doosje 120x80x32.cnc.txt

Code: Selecteer alles

%
(Doosje 120x80x32)
(T22 D=6 CR=0 - ZMIN=-33 - flat end mill)
;N10 G90 G94
;N15 G17
;N20 G21
;N25 M9
;N30 G28

(2D Pocket1)
N35 T22 M6
N40 S12500 M3
N45 G54
N50 G0 X41.572 Y137.824
N55 G43 Z8
N60 Z5
N65 G1 Z3.1 F700
N70 X41.544 Y137.82 Z2.918 F233.3
N75 X41.464 Y137.807 Z2.754
N80 X41.339 Y137.783 Z2.622
N85 X41.182 Y137.743 Z2.534
N90 X41.01 Y137.689 Z2.5
N95 G3 X42.9 Y132.311 Z2.187 I0.945 J-2.689
N100 X41.01 Y137.689 Z1.875 I-0.945 J2.689
N105 X42.9 Y132.311 Z1.562 I0.945 J-2.689
N110 X41.01 Y137.689 Z1.249 I-0.945 J2.689
N115 X42.9 Y132.311 Z0.937 I0.945 J-2.689
N120 X41.01 Y137.689 Z0.624 I-0.945 J2.689
N125 X42.9 Y132.311 Z0.311 I0.945 J-2.689
N130 X41.01 Y137.689 Z-0.001 I-0.945 J2.689
N135 X42.9 Y132.311 Z-0.314 I0.945 J-2.689
N140 X41.01 Y137.689 Z-0.627 I-0.945 J2.689
N145 X42.9 Y132.311 Z-0.939 I0.945 J-2.689
N150 X41.01 Y137.689 Z-1.252 I-0.945 J2.689
N155 X42.9 Y132.311 Z-1.565 I0.945 J-2.689
N160 X41.01 Y137.689 Z-1.877 I-0.945 J2.689
N165 X39.105 Y135 Z-2 I0.945 J-2.689
N170 G1 Y134.424 F700
N175 G3 X39.424 Y134.105 I0.319
N180 G1 X80.576
N185 G3 X80.895 Y134.424 J0.319
N190 G1 Y135.576
N195 G3 X80.576 Y135.895 I-0.319
N200 G1 X39.424
N205 G3 X39.105 Y135.576 J-0.319
N210 G1 Y135
N215 G2 X37.94 Y133.259 I-1.883
N220 G3 X38.347 Y131.205 I0.407 J-0.987
N225 G1 X83.476
N230 G3 X83.795 Y131.524 J0.319
N235 G1 Y138.476
N240 G3 X83.476 Y138.795 I-0.319
N245 G1 X36.524
N250 G3 X36.205 Y138.476 J-0.319
N255 G1 Y131.524
N260 G3 X36.524 Y131.205 I0.319
N265 G1 X38.347
N270 G2 X40.522 Y129.755 J-2.356
N275 G3 X42.697 Y128.305 I2.175 J0.906
N280 G1 X86.376
N285 G3 X86.695 Y128.624 J0.319
N290 G1 Y141.376
N295 G3 X86.376 Y141.695 I-0.319
N300 G1 X33.624
N305 G3 X33.305 Y141.376 J-0.319
N310 G1 Y128.624
N315 G3 X33.624 Y128.305 I0.319
N320 G1 X42.697
N325 G2 X44.872 Y126.855 J-2.356
N330 G3 X47.047 Y125.405 I2.175 J0.906
N335 G1 X89.276
N340 G3 X89.595 Y125.724 J0.319
N345 G1 Y144.276
N350 G3 X89.276 Y144.595 I-0.319
N355 G1 X30.724
N360 G3 X30.405 Y144.276 J-0.319
N365 G1 Y125.724
N370 G3 X30.724 Y125.405 I0.319
N375 G1 X47.047
N380 G2 X49.222 Y123.955 J-2.356
N385 G3 X51.397 Y122.505 I2.175 J0.906
N390 G1 X92.176
N395 G3 X92.495 Y122.824 J0.319
N400 G1 Y147.176
N405 G3 X92.176 Y147.495 I-0.319
N410 G1 X27.824
N415 G3 X27.505 Y147.176 J-0.319
N420 G1 Y122.824
N425 G3 X27.824 Y122.505 I0.319
N430 G1 X51.397
N435 G2 X53.572 Y121.055 J-2.356
N440 G3 X55.747 Y119.605 I2.175 J0.906
N445 G1 X95.076
N450 G3 X95.395 Y119.924 J0.319
N455 G1 Y150.076
N460 G3 X95.076 Y150.395 I-0.319
N465 G1 X24.924
N470 G3 X24.605 Y150.076 J-0.319
N475 G1 Y119.924
N480 G3 X24.924 Y119.605 I0.319
N485 G1 X55.747
N490 G2 X57.922 Y118.155 J-2.356
N495 G3 X60.097 Y116.705 I2.175 J0.906
N500 G1 X97.976
N505 G3 X98.295 Y117.024 J0.319
N510 G1 Y152.976
N515 G3 X97.976 Y153.295 I-0.319
N520 G1 X22.024
N525 G3 X21.705 Y152.976 J-0.319
N530 G1 Y117.024
N535 G3 X22.024 Y116.705 I0.319
N540 G1 X60.097
N545 G2 X62.272 Y115.255 J-2.356
N550 G3 X64.447 Y113.805 I2.175 J0.906
N555 G1 X100.876
N560 G3 X101.195 Y114.124 J0.319
N565 G1 Y155.876
N570 G3 X100.876 Y156.195 I-0.319
N575 G1 X19.124
N580 G3 X18.805 Y155.876 J-0.319
N585 G1 Y114.124
N590 G3 X19.124 Y113.805 I0.319
N595 G1 X64.447
N600 G2 X66.622 Y112.355 J-2.356
N605 G3 X68.797 Y110.905 I2.175 J0.906
N610 G1 X103.776
N615 G3 X104.095 Y111.224 J0.319
N620 G1 Y158.776
N625 G3 X103.776 Y159.095 I-0.319
N630 G1 X16.224
N635 G3 X15.905 Y158.776 J-0.319
N640 G1 Y111.224
N645 G3 X16.224 Y110.905 I0.319
N650 G1 X68.797
N655 G2 X70.976 Y109.452 J-2.36
N660 G3 X73.155 Y108 I2.179 J0.908
N665 G1 X107
N670 Y162
N675 X13
N680 Y108
N685 X73.155
N690 G3 X73.416 Y108.447 J0.3
N695 G1 X70.42 Y113.777
N700 X70.387 Y113.823
N705 X70.347 Y113.863
N710 X41.463 Y137.102
N715 X41.443 Y137.123
N720 X41.428 Y137.147
N725 X41.201 Y137.634
N730 X41.181 Y137.665
N735 X41.153 Y137.689
N740 X41.119 Y137.703
N745 X41.082 Y137.708
N750 X41.046 Y137.701
N755 G3 X42.864 Y132.299 Z-2.313 I0.909 J-2.701 F233.3
N760 X41.046 Y137.701 Z-2.625 I-0.909 J2.701
N765 X42.864 Y132.299 Z-2.938 I0.909 J-2.701
N770 X41.046 Y137.701 Z-3.251 I-0.909 J2.701
N775 X42.864 Y132.299 Z-3.563 I0.909 J-2.701
N780 X41.046 Y137.701 Z-3.876 I-0.909 J2.701
N785 X39.105 Y135 Z-4 I0.909 J-2.701
N790 G1 Y134.424 F700
N795 G3 X39.424 Y134.105 I0.319
N800 G1 X80.576
N805 G3 X80.895 Y134.424 J0.319
N810 G1 Y135.576
N815 G3 X80.576 Y135.895 I-0.319
N820 G1 X39.424
N825 G3 X39.105 Y135.576 J-0.319
N830 G1 Y135
N835 G2 X37.94 Y133.259 I-1.883
N840 G3 X38.347 Y131.205 I0.407 J-0.987
N845 G1 X83.476
N850 G3 X83.795 Y131.524 J0.319
N855 G1 Y138.476
N860 G3 X83.476 Y138.795 I-0.319
N865 G1 X36.524
N870 G3 X36.205 Y138.476 J-0.319
N875 G1 Y131.524
N880 G3 X36.524 Y131.205 I0.319
N885 G1 X38.347
N890 G2 X40.522 Y129.755 J-2.356
N895 G3 X42.697 Y128.305 I2.175 J0.906
N900 G1 X86.376
N905 G3 X86.695 Y128.624 J0.319
N910 G1 Y141.376
N915 G3 X86.376 Y141.695 I-0.319
N920 G1 X33.624
N925 G3 X33.305 Y141.376 J-0.319
N930 G1 Y128.624
N935 G3 X33.624 Y128.305 I0.319
N940 G1 X42.697
N945 G2 X44.872 Y126.855 J-2.356
N950 G3 X47.047 Y125.405 I2.175 J0.906
N955 G1 X89.276
N960 G3 X89.595 Y125.724 J0.319
N965 G1 Y144.276
N970 G3 X89.276 Y144.595 I-0.319
N975 G1 X30.724
N980 G3 X30.405 Y144.276 J-0.319
N985 G1 Y125.724
N990 G3 X30.724 Y125.405 I0.319
N995 G1 X47.047
N1000 G2 X49.222 Y123.955 J-2.356
N1005 G3 X51.397 Y122.505 I2.175 J0.906
N1010 G1 X92.176
N1015 G3 X92.495 Y122.824 J0.319
N1020 G1 Y147.176
N1025 G3 X92.176 Y147.495 I-0.319
N1030 G1 X27.824
N1035 G3 X27.505 Y147.176 J-0.319
N1040 G1 Y122.824
N1045 G3 X27.824 Y122.505 I0.319
N1050 G1 X51.397
N1055 G2 X53.572 Y121.055 J-2.356
N1060 G3 X55.747 Y119.605 I2.175 J0.906
N1065 G1 X95.076
N1070 G3 X95.395 Y119.924 J0.319
N1075 G1 Y150.076
N1080 G3 X95.076 Y150.395 I-0.319
N1085 G1 X24.924
N1090 G3 X24.605 Y150.076 J-0.319
N1095 G1 Y119.924
N1100 G3 X24.924 Y119.605 I0.319
N1105 G1 X55.747
N1110 G2 X57.922 Y118.155 J-2.356
N1115 G3 X60.097 Y116.705 I2.175 J0.906
N1120 G1 X97.976
N1125 G3 X98.295 Y117.024 J0.319
N1130 G1 Y152.976
N1135 G3 X97.976 Y153.295 I-0.319
N1140 G1 X22.024
N1145 G3 X21.705 Y152.976 J-0.319
N1150 G1 Y117.024
N1155 G3 X22.024 Y116.705 I0.319
N1160 G1 X60.097
N1165 G2 X62.272 Y115.255 J-2.356
N1170 G3 X64.447 Y113.805 I2.175 J0.906
N1175 G1 X100.876
N1180 G3 X101.195 Y114.124 J0.319
N1185 G1 Y155.876
N1190 G3 X100.876 Y156.195 I-0.319
N1195 G1 X19.124
N1200 G3 X18.805 Y155.876 J-0.319
N1205 G1 Y114.124
N1210 G3 X19.124 Y113.805 I0.319
N1215 G1 X64.447
N1220 G2 X66.622 Y112.355 J-2.356
N1225 G3 X68.797 Y110.905 I2.175 J0.906
N1230 G1 X103.776
N1235 G3 X104.095 Y111.224 J0.319
N1240 G1 Y158.776
N1245 G3 X103.776 Y159.095 I-0.319
N1250 G1 X16.224
N1255 G3 X15.905 Y158.776 J-0.319
N1260 G1 Y111.224
N1265 G3 X16.224 Y110.905 I0.319
N1270 G1 X68.797
N1275 G2 X70.976 Y109.452 J-2.36
N1280 G3 X73.155 Y108 I2.179 J0.908
N1285 G1 X107
N1290 Y162
N1295 X13
N1300 Y108
N1305 X73.155
N1310 G3 X73.416 Y108.447 J0.3
N1315 G1 X70.42 Y113.777
N1320 X70.387 Y113.823
N1325 X70.347 Y113.863
N1330 X41.463 Y137.102
N1335 X41.443 Y137.123
N1340 X41.428 Y137.147
N1345 X41.201 Y137.634
N1350 X41.181 Y137.665
N1355 X41.153 Y137.689
N1360 X41.119 Y137.703
N1365 X41.082 Y137.708
N1370 X41.046 Y137.701
N1375 G3 X42.864 Y132.299 Z-4.313 I0.909 J-2.701 F233.3
N1380 X41.046 Y137.701 Z-4.625 I-0.909 J2.701
N1385 X42.864 Y132.299 Z-4.938 I0.909 J-2.701
N1390 X41.046 Y137.701 Z-5.251 I-0.909 J2.701
N1395 X42.864 Y132.299 Z-5.563 I0.909 J-2.701
N1400 X41.046 Y137.701 Z-5.876 I-0.909 J2.701
N1405 X39.105 Y135 Z-6 I0.909 J-2.701
N1410 G1 Y134.424 F700
N1415 G3 X39.424 Y134.105 I0.319
N1420 G1 X80.576
N1425 G3 X80.895 Y134.424 J0.319
N1430 G1 Y135.576
N1435 G3 X80.576 Y135.895 I-0.319
N1440 G1 X39.424
N1445 G3 X39.105 Y135.576 J-0.319
N1450 G1 Y135
N1455 G2 X37.94 Y133.259 I-1.883
N1460 G3 X38.347 Y131.205 I0.407 J-0.987
N1465 G1 X83.476
N1470 G3 X83.795 Y131.524 J0.319
N1475 G1 Y138.476
N1480 G3 X83.476 Y138.795 I-0.319
N1485 G1 X36.524
N1490 G3 X36.205 Y138.476 J-0.319
N1495 G1 Y131.524
N1500 G3 X36.524 Y131.205 I0.319
N1505 G1 X38.347
N1510 G2 X40.522 Y129.755 J-2.356
N1515 G3 X42.697 Y128.305 I2.175 J0.906
N1520 G1 X86.376
N1525 G3 X86.695 Y128.624 J0.319
N1530 G1 Y141.376
N1535 G3 X86.376 Y141.695 I-0.319
N1540 G1 X33.624
N1545 G3 X33.305 Y141.376 J-0.319
N1550 G1 Y128.624
N1555 G3 X33.624 Y128.305 I0.319
N1560 G1 X42.697
N1565 G2 X44.872 Y126.855 J-2.356
N1570 G3 X47.047 Y125.405 I2.175 J0.906
N1575 G1 X89.276
N1580 G3 X89.595 Y125.724 J0.319
N1585 G1 Y144.276
N1590 G3 X89.276 Y144.595 I-0.319
N1595 G1 X30.724
N1600 G3 X30.405 Y144.276 J-0.319
N1605 G1 Y125.724
N1610 G3 X30.724 Y125.405 I0.319
N1615 G1 X47.047
N1620 G2 X49.222 Y123.955 J-2.356
N1625 G3 X51.397 Y122.505 I2.175 J0.906
N1630 G1 X92.176
N1635 G3 X92.495 Y122.824 J0.319
N1640 G1 Y147.176
N1645 G3 X92.176 Y147.495 I-0.319
N1650 G1 X27.824
N1655 G3 X27.505 Y147.176 J-0.319
N1660 G1 Y122.824
N1665 G3 X27.824 Y122.505 I0.319
N1670 G1 X51.397
N1675 G2 X53.572 Y121.055 J-2.356
N1680 G3 X55.747 Y119.605 I2.175 J0.906
N1685 G1 X95.076
N1690 G3 X95.395 Y119.924 J0.319
N1695 G1 Y150.076
N1700 G3 X95.076 Y150.395 I-0.319
N1705 G1 X24.924
N1710 G3 X24.605 Y150.076 J-0.319
N1715 G1 Y119.924
N1720 G3 X24.924 Y119.605 I0.319
N1725 G1 X55.747
N1730 G2 X57.922 Y118.155 J-2.356
N1735 G3 X60.097 Y116.705 I2.175 J0.906
N1740 G1 X97.976
N1745 G3 X98.295 Y117.024 J0.319
N1750 G1 Y152.976
N1755 G3 X97.976 Y153.295 I-0.319
N1760 G1 X22.024
N1765 G3 X21.705 Y152.976 J-0.319
N1770 G1 Y117.024
N1775 G3 X22.024 Y116.705 I0.319
N1780 G1 X60.097
N1785 G2 X62.272 Y115.255 J-2.356
N1790 G3 X64.447 Y113.805 I2.175 J0.906
N1795 G1 X100.876
N1800 G3 X101.195 Y114.124 J0.319
N1805 G1 Y155.876
N1810 G3 X100.876 Y156.195 I-0.319
N1815 G1 X19.124
N1820 G3 X18.805 Y155.876 J-0.319
N1825 G1 Y114.124
N1830 G3 X19.124 Y113.805 I0.319
N1835 G1 X64.447
N1840 G2 X66.622 Y112.355 J-2.356
N1845 G3 X68.797 Y110.905 I2.175 J0.906
N1850 G1 X103.776
N1855 G3 X104.095 Y111.224 J0.319
N1860 G1 Y158.776
N1865 G3 X103.776 Y159.095 I-0.319
N1870 G1 X16.224
N1875 G3 X15.905 Y158.776 J-0.319
N1880 G1 Y111.224
N1885 G3 X16.224 Y110.905 I0.319
N1890 G1 X68.797
N1895 G2 X70.976 Y109.452 J-2.36
N1900 G3 X73.155 Y108 I2.179 J0.908
N1905 G1 X107
N1910 Y162
N1915 X13
N1920 Y108
N1925 X73.155
N1930 G3 X73.416 Y108.447 J0.3
N1935 G1 X70.42 Y113.777
N1940 X70.387 Y113.823
N1945 X70.347 Y113.863
N1950 X41.463 Y137.102
N1955 X41.443 Y137.123
N1960 X41.428 Y137.147
N1965 X41.201 Y137.634
N1970 X41.181 Y137.665
N1975 X41.153 Y137.689
N1980 X41.119 Y137.703
N1985 X41.082 Y137.708
N1990 X41.046 Y137.701
N1995 G3 X42.864 Y132.299 Z-6.313 I0.909 J-2.701 F233.3
N2000 X41.046 Y137.701 Z-6.625 I-0.909 J2.701
N2005 X42.864 Y132.299 Z-6.938 I0.909 J-2.701
N2010 X41.046 Y137.701 Z-7.251 I-0.909 J2.701
N2015 X42.864 Y132.299 Z-7.563 I0.909 J-2.701
N2020 X41.046 Y137.701 Z-7.876 I-0.909 J2.701
N2025 X39.105 Y135 Z-8 I0.909 J-2.701
N2030 G1 Y134.424 F700
N2035 G3 X39.424 Y134.105 I0.319
N2040 G1 X80.576
N2045 G3 X80.895 Y134.424 J0.319
N2050 G1 Y135.576
N2055 G3 X80.576 Y135.895 I-0.319
N2060 G1 X39.424
N2065 G3 X39.105 Y135.576 J-0.319
N2070 G1 Y135
N2075 G2 X37.94 Y133.259 I-1.883
N2080 G3 X38.347 Y131.205 I0.407 J-0.987
N2085 G1 X83.476
N2090 G3 X83.795 Y131.524 J0.319
N2095 G1 Y138.476
N2100 G3 X83.476 Y138.795 I-0.319
N2105 G1 X36.524
N2110 G3 X36.205 Y138.476 J-0.319
N2115 G1 Y131.524
N2120 G3 X36.524 Y131.205 I0.319
N2125 G1 X38.347
N2130 G2 X40.522 Y129.755 J-2.356
N2135 G3 X42.697 Y128.305 I2.175 J0.906
N2140 G1 X86.376
N2145 G3 X86.695 Y128.624 J0.319
N2150 G1 Y141.376
N2155 G3 X86.376 Y141.695 I-0.319
N2160 G1 X33.624
N2165 G3 X33.305 Y141.376 J-0.319
N2170 G1 Y128.624
N2175 G3 X33.624 Y128.305 I0.319
N2180 G1 X42.697
N2185 G2 X44.872 Y126.855 J-2.356
N2190 G3 X47.047 Y125.405 I2.175 J0.906
N2195 G1 X89.276
N2200 G3 X89.595 Y125.724 J0.319
N2205 G1 Y144.276
N2210 G3 X89.276 Y144.595 I-0.319
N2215 G1 X30.724
N2220 G3 X30.405 Y144.276 J-0.319
N2225 G1 Y125.724
N2230 G3 X30.724 Y125.405 I0.319
N2235 G1 X47.047
N2240 G2 X49.222 Y123.955 J-2.356
N2245 G3 X51.397 Y122.505 I2.175 J0.906
N2250 G1 X92.176
N2255 G3 X92.495 Y122.824 J0.319
N2260 G1 Y147.176
N2265 G3 X92.176 Y147.495 I-0.319
N2270 G1 X27.824
N2275 G3 X27.505 Y147.176 J-0.319
N2280 G1 Y122.824
N2285 G3 X27.824 Y122.505 I0.319
N2290 G1 X51.397
N2295 G2 X53.572 Y121.055 J-2.356
N2300 G3 X55.747 Y119.605 I2.175 J0.906
N2305 G1 X95.076
N2310 G3 X95.395 Y119.924 J0.319
N2315 G1 Y150.076
N2320 G3 X95.076 Y150.395 I-0.319
N2325 G1 X24.924
N2330 G3 X24.605 Y150.076 J-0.319
N2335 G1 Y119.924
N2340 G3 X24.924 Y119.605 I0.319
N2345 G1 X55.747
N2350 G2 X57.922 Y118.155 J-2.356
N2355 G3 X60.097 Y116.705 I2.175 J0.906
N2360 G1 X97.976
N2365 G3 X98.295 Y117.024 J0.319
N2370 G1 Y152.976
N2375 G3 X97.976 Y153.295 I-0.319
N2380 G1 X22.024
N2385 G3 X21.705 Y152.976 J-0.319
N2390 G1 Y117.024
N2395 G3 X22.024 Y116.705 I0.319
N2400 G1 X60.097
N2405 G2 X62.272 Y115.255 J-2.356
N2410 G3 X64.447 Y113.805 I2.175 J0.906
N2415 G1 X100.876
N2420 G3 X101.195 Y114.124 J0.319
N2425 G1 Y155.876
N2430 G3 X100.876 Y156.195 I-0.319
N2435 G1 X19.124
N2440 G3 X18.805 Y155.876 J-0.319
N2445 G1 Y114.124
N2450 G3 X19.124 Y113.805 I0.319
N2455 G1 X64.447
N2460 G2 X66.622 Y112.355 J-2.356
N2465 G3 X68.797 Y110.905 I2.175 J0.906
N2470 G1 X103.776
N2475 G3 X104.095 Y111.224 J0.319
N2480 G1 Y158.776
N2485 G3 X103.776 Y159.095 I-0.319
N2490 G1 X16.224
N2495 G3 X15.905 Y158.776 J-0.319
N2500 G1 Y111.224
N2505 G3 X16.224 Y110.905 I0.319
N2510 G1 X68.797
N2515 G2 X70.976 Y109.452 J-2.36
N2520 G3 X73.155 Y108 I2.179 J0.908
N2525 G1 X107
N2530 Y162
N2535 X13
N2540 Y108
N2545 X73.155
N2550 G3 X73.416 Y108.447 J0.3
N2555 G1 X70.42 Y113.777
N2560 X70.387 Y113.823
N2565 X70.347 Y113.863
N2570 X41.463 Y137.102
N2575 X41.443 Y137.123
N2580 X41.428 Y137.147
N2585 X41.201 Y137.634
N2590 X41.181 Y137.665
N2595 X41.153 Y137.689
N2600 X41.119 Y137.703
N2605 X41.082 Y137.708
N2610 X41.046 Y137.701
N2615 G3 X42.864 Y132.299 Z-8.313 I0.909 J-2.701 F233.3
N2620 X41.046 Y137.701 Z-8.625 I-0.909 J2.701
N2625 X42.864 Y132.299 Z-8.938 I0.909 J-2.701
N2630 X41.046 Y137.701 Z-9.251 I-0.909 J2.701
N2635 X42.864 Y132.299 Z-9.563 I0.909 J-2.701
N2640 X41.046 Y137.701 Z-9.876 I-0.909 J2.701
N2645 X39.105 Y135 Z-10 I0.909 J-2.701
N2650 G1 Y134.424 F700
N2655 G3 X39.424 Y134.105 I0.319
N2660 G1 X80.576
N2665 G3 X80.895 Y134.424 J0.319
N2670 G1 Y135.576
N2675 G3 X80.576 Y135.895 I-0.319
N2680 G1 X39.424
N2685 G3 X39.105 Y135.576 J-0.319
N2690 G1 Y135
N2695 G2 X37.94 Y133.259 I-1.883
N2700 G3 X38.347 Y131.205 I0.407 J-0.987
N2705 G1 X83.476
N2710 G3 X83.795 Y131.524 J0.319
N2715 G1 Y138.476
N2720 G3 X83.476 Y138.795 I-0.319
N2725 G1 X36.524
N2730 G3 X36.205 Y138.476 J-0.319
N2735 G1 Y131.524
N2740 G3 X36.524 Y131.205 I0.319
N2745 G1 X38.347
N2750 G2 X40.522 Y129.755 J-2.356
N2755 G3 X42.697 Y128.305 I2.175 J0.906
N2760 G1 X86.376
N2765 G3 X86.695 Y128.624 J0.319
N2770 G1 Y141.376
N2775 G3 X86.376 Y141.695 I-0.319
N2780 G1 X33.624
N2785 G3 X33.305 Y141.376 J-0.319
N2790 G1 Y128.624
N2795 G3 X33.624 Y128.305 I0.319
N2800 G1 X42.697
N2805 G2 X44.872 Y126.855 J-2.356
N2810 G3 X47.047 Y125.405 I2.175 J0.906
N2815 G1 X89.276
N2820 G3 X89.595 Y125.724 J0.319
N2825 G1 Y144.276
N2830 G3 X89.276 Y144.595 I-0.319
N2835 G1 X30.724
N2840 G3 X30.405 Y144.276 J-0.319
N2845 G1 Y125.724
N2850 G3 X30.724 Y125.405 I0.319
N2855 G1 X47.047
N2860 G2 X49.222 Y123.955 J-2.356
N2865 G3 X51.397 Y122.505 I2.175 J0.906
N2870 G1 X92.176
N2875 G3 X92.495 Y122.824 J0.319
N2880 G1 Y147.176
N2885 G3 X92.176 Y147.495 I-0.319
N2890 G1 X27.824
N2895 G3 X27.505 Y147.176 J-0.319
N2900 G1 Y122.824
N2905 G3 X27.824 Y122.505 I0.319
N2910 G1 X51.397
N2915 G2 X53.572 Y121.055 J-2.356
N2920 G3 X55.747 Y119.605 I2.175 J0.906
N2925 G1 X95.076
N2930 G3 X95.395 Y119.924 J0.319
N2935 G1 Y150.076
N2940 G3 X95.076 Y150.395 I-0.319
N2945 G1 X24.924
N2950 G3 X24.605 Y150.076 J-0.319
N2955 G1 Y119.924
N2960 G3 X24.924 Y119.605 I0.319
N2965 G1 X55.747
N2970 G2 X57.922 Y118.155 J-2.356
N2975 G3 X60.097 Y116.705 I2.175 J0.906
N2980 G1 X97.976
N2985 G3 X98.295 Y117.024 J0.319
N2990 G1 Y152.976
N2995 G3 X97.976 Y153.295 I-0.319
N3000 G1 X22.024
N3005 G3 X21.705 Y152.976 J-0.319
N3010 G1 Y117.024
N3015 G3 X22.024 Y116.705 I0.319
N3020 G1 X60.097
N3025 G2 X62.272 Y115.255 J-2.356
N3030 G3 X64.447 Y113.805 I2.175 J0.906
N3035 G1 X100.876
N3040 G3 X101.195 Y114.124 J0.319
N3045 G1 Y155.876
N3050 G3 X100.876 Y156.195 I-0.319
N3055 G1 X19.124
N3060 G3 X18.805 Y155.876 J-0.319
N3065 G1 Y114.124
N3070 G3 X19.124 Y113.805 I0.319
N3075 G1 X64.447
N3080 G2 X66.622 Y112.355 J-2.356
N3085 G3 X68.797 Y110.905 I2.175 J0.906
N3090 G1 X103.776
N3095 G3 X104.095 Y111.224 J0.319
N3100 G1 Y158.776
N3105 G3 X103.776 Y159.095 I-0.319
N3110 G1 X16.224
N3115 G3 X15.905 Y158.776 J-0.319
N3120 G1 Y111.224
N3125 G3 X16.224 Y110.905 I0.319
N3130 G1 X68.797
N3135 G2 X70.976 Y109.452 J-2.36
N3140 G3 X73.155 Y108 I2.179 J0.908
N3145 G1 X107
N3150 Y162
N3155 X13
N3160 Y108
N3165 X73.155
N3170 G3 X73.416 Y108.447 J0.3
N3175 G1 X70.42 Y113.777
N3180 X70.387 Y113.823
N3185 X70.347 Y113.863
N3190 X41.463 Y137.102
N3195 X41.443 Y137.123
N3200 X41.428 Y137.147
N3205 X41.201 Y137.634
N3210 X41.181 Y137.665
N3215 X41.153 Y137.689
N3220 X41.119 Y137.703
N3225 X41.082 Y137.708
N3230 X41.046 Y137.701
N3235 G3 X42.864 Y132.299 Z-10.313 I0.909 J-2.701 F233.3
N3240 X41.046 Y137.701 Z-10.625 I-0.909 J2.701
N3245 X42.864 Y132.299 Z-10.938 I0.909 J-2.701
N3250 X41.046 Y137.701 Z-11.251 I-0.909 J2.701
N3255 X42.864 Y132.299 Z-11.563 I0.909 J-2.701
N3260 X41.046 Y137.701 Z-11.876 I-0.909 J2.701
N3265 X39.105 Y135 Z-12 I0.909 J-2.701
N3270 G1 Y134.424 F700
N3275 G3 X39.424 Y134.105 I0.319
N3280 G1 X80.576
N3285 G3 X80.895 Y134.424 J0.319
N3290 G1 Y135.576
N3295 G3 X80.576 Y135.895 I-0.319
N3300 G1 X39.424
N3305 G3 X39.105 Y135.576 J-0.319
N3310 G1 Y135
N3315 G2 X37.94 Y133.259 I-1.883
N3320 G3 X38.347 Y131.205 I0.407 J-0.987
N3325 G1 X83.476
N3330 G3 X83.795 Y131.524 J0.319
N3335 G1 Y138.476
N3340 G3 X83.476 Y138.795 I-0.319
N3345 G1 X36.524
N3350 G3 X36.205 Y138.476 J-0.319
N3355 G1 Y131.524
N3360 G3 X36.524 Y131.205 I0.319
N3365 G1 X38.347
N3370 G2 X40.522 Y129.755 J-2.356
N3375 G3 X42.697 Y128.305 I2.175 J0.906
N3380 G1 X86.376
N3385 G3 X86.695 Y128.624 J0.319
N3390 G1 Y141.376
N3395 G3 X86.376 Y141.695 I-0.319
N3400 G1 X33.624
N3405 G3 X33.305 Y141.376 J-0.319
N3410 G1 Y128.624
N3415 G3 X33.624 Y128.305 I0.319
N3420 G1 X42.697
N3425 G2 X44.872 Y126.855 J-2.356
N3430 G3 X47.047 Y125.405 I2.175 J0.906
N3435 G1 X89.276
N3440 G3 X89.595 Y125.724 J0.319
N3445 G1 Y144.276
N3450 G3 X89.276 Y144.595 I-0.319
N3455 G1 X30.724
N3460 G3 X30.405 Y144.276 J-0.319
N3465 G1 Y125.724
N3470 G3 X30.724 Y125.405 I0.319
N3475 G1 X47.047
N3480 G2 X49.222 Y123.955 J-2.356
N3485 G3 X51.397 Y122.505 I2.175 J0.906
N3490 G1 X92.176
N3495 G3 X92.495 Y122.824 J0.319
N3500 G1 Y147.176
N3505 G3 X92.176 Y147.495 I-0.319
N3510 G1 X27.824
N3515 G3 X27.505 Y147.176 J-0.319
N3520 G1 Y122.824
N3525 G3 X27.824 Y122.505 I0.319
N3530 G1 X51.397
N3535 G2 X53.572 Y121.055 J-2.356
N3540 G3 X55.747 Y119.605 I2.175 J0.906
N3545 G1 X95.076
N3550 G3 X95.395 Y119.924 J0.319
N3555 G1 Y150.076
N3560 G3 X95.076 Y150.395 I-0.319
N3565 G1 X24.924
N3570 G3 X24.605 Y150.076 J-0.319
N3575 G1 Y119.924
N3580 G3 X24.924 Y119.605 I0.319
N3585 G1 X55.747
N3590 G2 X57.922 Y118.155 J-2.356
N3595 G3 X60.097 Y116.705 I2.175 J0.906
N3600 G1 X97.976
N3605 G3 X98.295 Y117.024 J0.319
N3610 G1 Y152.976
N3615 G3 X97.976 Y153.295 I-0.319
N3620 G1 X22.024
N3625 G3 X21.705 Y152.976 J-0.319
N3630 G1 Y117.024
N3635 G3 X22.024 Y116.705 I0.319
N3640 G1 X60.097
N3645 G2 X62.272 Y115.255 J-2.356
N3650 G3 X64.447 Y113.805 I2.175 J0.906
N3655 G1 X100.876
N3660 G3 X101.195 Y114.124 J0.319
N3665 G1 Y155.876
N3670 G3 X100.876 Y156.195 I-0.319
N3675 G1 X19.124
N3680 G3 X18.805 Y155.876 J-0.319
N3685 G1 Y114.124
N3690 G3 X19.124 Y113.805 I0.319
N3695 G1 X64.447
N3700 G2 X66.622 Y112.355 J-2.356
N3705 G3 X68.797 Y110.905 I2.175 J0.906
N3710 G1 X103.776
N3715 G3 X104.095 Y111.224 J0.319
N3720 G1 Y158.776
N3725 G3 X103.776 Y159.095 I-0.319
N3730 G1 X16.224
N3735 G3 X15.905 Y158.776 J-0.319
N3740 G1 Y111.224
N3745 G3 X16.224 Y110.905 I0.319
N3750 G1 X68.797
N3755 G2 X70.976 Y109.452 J-2.36
N3760 G3 X73.155 Y108 I2.179 J0.908
N3765 G1 X107
N3770 Y162
N3775 X13
N3780 Y108
N3785 X73.155
N3790 G3 X73.416 Y108.447 J0.3
N3795 G1 X70.42 Y113.777
N3800 X70.387 Y113.823
N3805 X70.347 Y113.863
N3810 X41.463 Y137.102
N3815 X41.443 Y137.123
N3820 X41.428 Y137.147
N3825 X41.201 Y137.634
N3830 X41.181 Y137.665
N3835 X41.153 Y137.689
N3840 X41.119 Y137.703
N3845 X41.082 Y137.708
N3850 X41.046 Y137.701
N3855 G3 X42.864 Y132.299 Z-12.313 I0.909 J-2.701 F233.3
N3860 X41.046 Y137.701 Z-12.625 I-0.909 J2.701
N3865 X42.864 Y132.299 Z-12.938 I0.909 J-2.701
N3870 X41.046 Y137.701 Z-13.251 I-0.909 J2.701
N3875 X42.864 Y132.299 Z-13.563 I0.909 J-2.701
N3880 X41.046 Y137.701 Z-13.876 I-0.909 J2.701
N3885 X39.105 Y135 Z-14 I0.909 J-2.701
N3890 G1 Y134.424 F700
N3895 G3 X39.424 Y134.105 I0.319
N3900 G1 X80.576
N3905 G3 X80.895 Y134.424 J0.319
N3910 G1 Y135.576
N3915 G3 X80.576 Y135.895 I-0.319
N3920 G1 X39.424
N3925 G3 X39.105 Y135.576 J-0.319
N3930 G1 Y135
N3935 G2 X37.94 Y133.259 I-1.883
N3940 G3 X38.347 Y131.205 I0.407 J-0.987
N3945 G1 X83.476
N3950 G3 X83.795 Y131.524 J0.319
N3955 G1 Y138.476
N3960 G3 X83.476 Y138.795 I-0.319
N3965 G1 X36.524
N3970 G3 X36.205 Y138.476 J-0.319
N3975 G1 Y131.524
N3980 G3 X36.524 Y131.205 I0.319
N3985 G1 X38.347
N3990 G2 X40.522 Y129.755 J-2.356
N3995 G3 X42.697 Y128.305 I2.175 J0.906
N4000 G1 X86.376
N4005 G3 X86.695 Y128.624 J0.319
N4010 G1 Y141.376
N4015 G3 X86.376 Y141.695 I-0.319
N4020 G1 X33.624
N4025 G3 X33.305 Y141.376 J-0.319
N4030 G1 Y128.624
N4035 G3 X33.624 Y128.305 I0.319
N4040 G1 X42.697
N4045 G2 X44.872 Y126.855 J-2.356
N4050 G3 X47.047 Y125.405 I2.175 J0.906
N4055 G1 X89.276
N4060 G3 X89.595 Y125.724 J0.319
N4065 G1 Y144.276
N4070 G3 X89.276 Y144.595 I-0.319
N4075 G1 X30.724
N4080 G3 X30.405 Y144.276 J-0.319
N4085 G1 Y125.724
N4090 G3 X30.724 Y125.405 I0.319
N4095 G1 X47.047
N4100 G2 X49.222 Y123.955 J-2.356
N4105 G3 X51.397 Y122.505 I2.175 J0.906
N4110 G1 X92.176
N4115 G3 X92.495 Y122.824 J0.319
N4120 G1 Y147.176
N4125 G3 X92.176 Y147.495 I-0.319
N4130 G1 X27.824
N4135 G3 X27.505 Y147.176 J-0.319
N4140 G1 Y122.824
N4145 G3 X27.824 Y122.505 I0.319
N4150 G1 X51.397
N4155 G2 X53.572 Y121.055 J-2.356
N4160 G3 X55.747 Y119.605 I2.175 J0.906
N4165 G1 X95.076
N4170 G3 X95.395 Y119.924 J0.319
N4175 G1 Y150.076
N4180 G3 X95.076 Y150.395 I-0.319
N4185 G1 X24.924
N4190 G3 X24.605 Y150.076 J-0.319
N4195 G1 Y119.924
N4200 G3 X24.924 Y119.605 I0.319
N4205 G1 X55.747
N4210 G2 X57.922 Y118.155 J-2.356
N4215 G3 X60.097 Y116.705 I2.175 J0.906
N4220 G1 X97.976
N4225 G3 X98.295 Y117.024 J0.319
N4230 G1 Y152.976
N4235 G3 X97.976 Y153.295 I-0.319
N4240 G1 X22.024
N4245 G3 X21.705 Y152.976 J-0.319
N4250 G1 Y117.024
N4255 G3 X22.024 Y116.705 I0.319
N4260 G1 X60.097
N4265 G2 X62.272 Y115.255 J-2.356
N4270 G3 X64.447 Y113.805 I2.175 J0.906
N4275 G1 X100.876
N4280 G3 X101.195 Y114.124 J0.319
N4285 G1 Y155.876
N4290 G3 X100.876 Y156.195 I-0.319
N4295 G1 X19.124
N4300 G3 X18.805 Y155.876 J-0.319
N4305 G1 Y114.124
N4310 G3 X19.124 Y113.805 I0.319
N4315 G1 X64.447
N4320 G2 X66.622 Y112.355 J-2.356
N4325 G3 X68.797 Y110.905 I2.175 J0.906
N4330 G1 X103.776
N4335 G3 X104.095 Y111.224 J0.319
N4340 G1 Y158.776
N4345 G3 X103.776 Y159.095 I-0.319
N4350 G1 X16.224
N4355 G3 X15.905 Y158.776 J-0.319
N4360 G1 Y111.224
N4365 G3 X16.224 Y110.905 I0.319
N4370 G1 X68.797
N4375 G2 X70.976 Y109.452 J-2.36
N4380 G3 X73.155 Y108 I2.179 J0.908
N4385 G1 X107
N4390 Y162
N4395 X13
N4400 Y108
N4405 X73.155
N4410 G3 X73.416 Y108.447 J0.3
N4415 G1 X70.42 Y113.777
N4420 X70.387 Y113.823
N4425 X70.347 Y113.863
N4430 X41.463 Y137.102
N4435 X41.443 Y137.123
N4440 X41.428 Y137.147
N4445 X41.201 Y137.634
N4450 X41.181 Y137.665
N4455 X41.153 Y137.689
N4460 X41.119 Y137.703
N4465 X41.082 Y137.708
N4470 X41.046 Y137.701
N4475 G3 X42.864 Y132.299 Z-14.313 I0.909 J-2.701 F233.3
N4480 X41.046 Y137.701 Z-14.625 I-0.909 J2.701
N4485 X42.864 Y132.299 Z-14.938 I0.909 J-2.701
N4490 X41.046 Y137.701 Z-15.251 I-0.909 J2.701
N4495 X42.864 Y132.299 Z-15.563 I0.909 J-2.701
N4500 X41.046 Y137.701 Z-15.876 I-0.909 J2.701
N4505 X39.105 Y135 Z-16 I0.909 J-2.701
N4510 G1 Y134.424 F700
N4515 G3 X39.424 Y134.105 I0.319
N4520 G1 X80.576
N4525 G3 X80.895 Y134.424 J0.319
N4530 G1 Y135.576
N4535 G3 X80.576 Y135.895 I-0.319
N4540 G1 X39.424
N4545 G3 X39.105 Y135.576 J-0.319
N4550 G1 Y135
N4555 G2 X37.94 Y133.259 I-1.883
N4560 G3 X38.347 Y131.205 I0.407 J-0.987
N4565 G1 X83.476
N4570 G3 X83.795 Y131.524 J0.319
N4575 G1 Y138.476
N4580 G3 X83.476 Y138.795 I-0.319
N4585 G1 X36.524
N4590 G3 X36.205 Y138.476 J-0.319
N4595 G1 Y131.524
N4600 G3 X36.524 Y131.205 I0.319
N4605 G1 X38.347
N4610 G2 X40.522 Y129.755 J-2.356
N4615 G3 X42.697 Y128.305 I2.175 J0.906
N4620 G1 X86.376
N4625 G3 X86.695 Y128.624 J0.319
N4630 G1 Y141.376
N4635 G3 X86.376 Y141.695 I-0.319
N4640 G1 X33.624
N4645 G3 X33.305 Y141.376 J-0.319
N4650 G1 Y128.624
N4655 G3 X33.624 Y128.305 I0.319
N4660 G1 X42.697
N4665 G2 X44.872 Y126.855 J-2.356
N4670 G3 X47.047 Y125.405 I2.175 J0.906
N4675 G1 X89.276
N4680 G3 X89.595 Y125.724 J0.319
N4685 G1 Y144.276
N4690 G3 X89.276 Y144.595 I-0.319
N4695 G1 X30.724
N4700 G3 X30.405 Y144.276 J-0.319
N4705 G1 Y125.724
N4710 G3 X30.724 Y125.405 I0.319
N4715 G1 X47.047
N4720 G2 X49.222 Y123.955 J-2.356
N4725 G3 X51.397 Y122.505 I2.175 J0.906
N4730 G1 X92.176
N4735 G3 X92.495 Y122.824 J0.319
N4740 G1 Y147.176
N4745 G3 X92.176 Y147.495 I-0.319
N4750 G1 X27.824
N4755 G3 X27.505 Y147.176 J-0.319
N4760 G1 Y122.824
N4765 G3 X27.824 Y122.505 I0.319
N4770 G1 X51.397
N4775 G2 X53.572 Y121.055 J-2.356
N4780 G3 X55.747 Y119.605 I2.175 J0.906
N4785 G1 X95.076
N4790 G3 X95.395 Y119.924 J0.319
N4795 G1 Y150.076
N4800 G3 X95.076 Y150.395 I-0.319
N4805 G1 X24.924
N4810 G3 X24.605 Y150.076 J-0.319
N4815 G1 Y119.924
N4820 G3 X24.924 Y119.605 I0.319
N4825 G1 X55.747
N4830 G2 X57.922 Y118.155 J-2.356
N4835 G3 X60.097 Y116.705 I2.175 J0.906
N4840 G1 X97.976
N4845 G3 X98.295 Y117.024 J0.319
N4850 G1 Y152.976
N4855 G3 X97.976 Y153.295 I-0.319
N4860 G1 X22.024
N4865 G3 X21.705 Y152.976 J-0.319
N4870 G1 Y117.024
N4875 G3 X22.024 Y116.705 I0.319
N4880 G1 X60.097
N4885 G2 X62.272 Y115.255 J-2.356
N4890 G3 X64.447 Y113.805 I2.175 J0.906
N4895 G1 X100.876
N4900 G3 X101.195 Y114.124 J0.319
N4905 G1 Y155.876
N4910 G3 X100.876 Y156.195 I-0.319
N4915 G1 X19.124
N4920 G3 X18.805 Y155.876 J-0.319
N4925 G1 Y114.124
N4930 G3 X19.124 Y113.805 I0.319
N4935 G1 X64.447
N4940 G2 X66.622 Y112.355 J-2.356
N4945 G3 X68.797 Y110.905 I2.175 J0.906
N4950 G1 X103.776
N4955 G3 X104.095 Y111.224 J0.319
N4960 G1 Y158.776
N4965 G3 X103.776 Y159.095 I-0.319
N4970 G1 X16.224
N4975 G3 X15.905 Y158.776 J-0.319
N4980 G1 Y111.224
N4985 G3 X16.224 Y110.905 I0.319
N4990 G1 X68.797
N4995 G2 X70.976 Y109.452 J-2.36
N5000 G3 X73.155 Y108 I2.179 J0.908
N5005 G1 X107
N5010 Y162
N5015 X13
N5020 Y108
N5025 X73.155
N5030 G3 X73.416 Y108.447 J0.3
N5035 G1 X70.42 Y113.777
N5040 X70.387 Y113.823
N5045 X70.347 Y113.863
N5050 X41.463 Y137.102
N5055 X41.443 Y137.123
N5060 X41.428 Y137.147
N5065 X41.201 Y137.634
N5070 X41.181 Y137.665
N5075 X41.153 Y137.689
N5080 X41.119 Y137.703
N5085 X41.082 Y137.708
N5090 X41.046 Y137.701
N5095 G3 X42.864 Y132.299 Z-16.313 I0.909 J-2.701 F233.3
N5100 X41.046 Y137.701 Z-16.625 I-0.909 J2.701
N5105 X42.864 Y132.299 Z-16.938 I0.909 J-2.701
N5110 X41.046 Y137.701 Z-17.251 I-0.909 J2.701
N5115 X42.864 Y132.299 Z-17.563 I0.909 J-2.701
N5120 X41.046 Y137.701 Z-17.876 I-0.909 J2.701
N5125 X39.105 Y135 Z-18 I0.909 J-2.701
N5130 G1 Y134.424 F700
N5135 G3 X39.424 Y134.105 I0.319
N5140 G1 X80.576
N5145 G3 X80.895 Y134.424 J0.319
N5150 G1 Y135.576
N5155 G3 X80.576 Y135.895 I-0.319
N5160 G1 X39.424
N5165 G3 X39.105 Y135.576 J-0.319
N5170 G1 Y135
N5175 G2 X37.94 Y133.259 I-1.883
N5180 G3 X38.347 Y131.205 I0.407 J-0.987
N5185 G1 X83.476
N5190 G3 X83.795 Y131.524 J0.319
N5195 G1 Y138.476
N5200 G3 X83.476 Y138.795 I-0.319
N5205 G1 X36.524
N5210 G3 X36.205 Y138.476 J-0.319
N5215 G1 Y131.524
N5220 G3 X36.524 Y131.205 I0.319
N5225 G1 X38.347
N5230 G2 X40.522 Y129.755 J-2.356
N5235 G3 X42.697 Y128.305 I2.175 J0.906
N5240 G1 X86.376
N5245 G3 X86.695 Y128.624 J0.319
N5250 G1 Y141.376
N5255 G3 X86.376 Y141.695 I-0.319
N5260 G1 X33.624
N5265 G3 X33.305 Y141.376 J-0.319
N5270 G1 Y128.624
N5275 G3 X33.624 Y128.305 I0.319
N5280 G1 X42.697
N5285 G2 X44.872 Y126.855 J-2.356
N5290 G3 X47.047 Y125.405 I2.175 J0.906
N5295 G1 X89.276
N5300 G3 X89.595 Y125.724 J0.319
N5305 G1 Y144.276
N5310 G3 X89.276 Y144.595 I-0.319
N5315 G1 X30.724
N5320 G3 X30.405 Y144.276 J-0.319
N5325 G1 Y125.724
N5330 G3 X30.724 Y125.405 I0.319
N5335 G1 X47.047
N5340 G2 X49.222 Y123.955 J-2.356
N5345 G3 X51.397 Y122.505 I2.175 J0.906
N5350 G1 X92.176
N5355 G3 X92.495 Y122.824 J0.319
N5360 G1 Y147.176
N5365 G3 X92.176 Y147.495 I-0.319
N5370 G1 X27.824
N5375 G3 X27.505 Y147.176 J-0.319
N5380 G1 Y122.824
N5385 G3 X27.824 Y122.505 I0.319
N5390 G1 X51.397
N5395 G2 X53.572 Y121.055 J-2.356
N5400 G3 X55.747 Y119.605 I2.175 J0.906
N5405 G1 X95.076
N5410 G3 X95.395 Y119.924 J0.319
N5415 G1 Y150.076
N5420 G3 X95.076 Y150.395 I-0.319
N5425 G1 X24.924
N5430 G3 X24.605 Y150.076 J-0.319
N5435 G1 Y119.924
N5440 G3 X24.924 Y119.605 I0.319
N5445 G1 X55.747
N5450 G2 X57.922 Y118.155 J-2.356
N5455 G3 X60.097 Y116.705 I2.175 J0.906
N5460 G1 X97.976
N5465 G3 X98.295 Y117.024 J0.319
N5470 G1 Y152.976
N5475 G3 X97.976 Y153.295 I-0.319
N5480 G1 X22.024
N5485 G3 X21.705 Y152.976 J-0.319
N5490 G1 Y117.024
N5495 G3 X22.024 Y116.705 I0.319
N5500 G1 X60.097
N5505 G2 X62.272 Y115.255 J-2.356
N5510 G3 X64.447 Y113.805 I2.175 J0.906
N5515 G1 X100.876
N5520 G3 X101.195 Y114.124 J0.319
N5525 G1 Y155.876
N5530 G3 X100.876 Y156.195 I-0.319
N5535 G1 X19.124
N5540 G3 X18.805 Y155.876 J-0.319
N5545 G1 Y114.124
N5550 G3 X19.124 Y113.805 I0.319
N5555 G1 X64.447
N5560 G2 X66.622 Y112.355 J-2.356
N5565 G3 X68.797 Y110.905 I2.175 J0.906
N5570 G1 X103.776
N5575 G3 X104.095 Y111.224 J0.319
N5580 G1 Y158.776
N5585 G3 X103.776 Y159.095 I-0.319
N5590 G1 X16.224
N5595 G3 X15.905 Y158.776 J-0.319
N5600 G1 Y111.224
N5605 G3 X16.224 Y110.905 I0.319
N5610 G1 X68.797
N5615 G2 X70.976 Y109.452 J-2.36
N5620 G3 X73.155 Y108 I2.179 J0.908
N5625 G1 X107
N5630 Y162
N5635 X13
N5640 Y108
N5645 X73.155
N5650 G3 X73.416 Y108.447 J0.3
N5655 G1 X70.42 Y113.777
N5660 X70.387 Y113.823
N5665 X70.347 Y113.863
N5670 X41.463 Y137.102
N5675 X41.443 Y137.123
N5680 X41.428 Y137.147
N5685 X41.201 Y137.634
N5690 X41.181 Y137.665
N5695 X41.153 Y137.689
N5700 X41.119 Y137.703
N5705 X41.082 Y137.708
N5710 X41.046 Y137.701
N5715 G3 X42.864 Y132.299 Z-18.313 I0.909 J-2.701 F233.3
N5720 X41.046 Y137.701 Z-18.625 I-0.909 J2.701
N5725 X42.864 Y132.299 Z-18.938 I0.909 J-2.701
N5730 X41.046 Y137.701 Z-19.251 I-0.909 J2.701
N5735 X42.864 Y132.299 Z-19.563 I0.909 J-2.701
N5740 X41.046 Y137.701 Z-19.876 I-0.909 J2.701
N5745 X39.105 Y135 Z-20 I0.909 J-2.701
N5750 G1 Y134.424 F700
N5755 G3 X39.424 Y134.105 I0.319
N5760 G1 X80.576
N5765 G3 X80.895 Y134.424 J0.319
N5770 G1 Y135.576
N5775 G3 X80.576 Y135.895 I-0.319
N5780 G1 X39.424
N5785 G3 X39.105 Y135.576 J-0.319
N5790 G1 Y135
N5795 G2 X37.94 Y133.259 I-1.883
N5800 G3 X38.347 Y131.205 I0.407 J-0.987
N5805 G1 X83.476
N5810 G3 X83.795 Y131.524 J0.319
N5815 G1 Y138.476
N5820 G3 X83.476 Y138.795 I-0.319
N5825 G1 X36.524
N5830 G3 X36.205 Y138.476 J-0.319
N5835 G1 Y131.524
N5840 G3 X36.524 Y131.205 I0.319
N5845 G1 X38.347
N5850 G2 X40.522 Y129.755 J-2.356
N5855 G3 X42.697 Y128.305 I2.175 J0.906
N5860 G1 X86.376
N5865 G3 X86.695 Y128.624 J0.319
N5870 G1 Y141.376
N5875 G3 X86.376 Y141.695 I-0.319
N5880 G1 X33.624
N5885 G3 X33.305 Y141.376 J-0.319
N5890 G1 Y128.624
N5895 G3 X33.624 Y128.305 I0.319
N5900 G1 X42.697
N5905 G2 X44.872 Y126.855 J-2.356
N5910 G3 X47.047 Y125.405 I2.175 J0.906
N5915 G1 X89.276
N5920 G3 X89.595 Y125.724 J0.319
N5925 G1 Y144.276
N5930 G3 X89.276 Y144.595 I-0.319
N5935 G1 X30.724
N5940 G3 X30.405 Y144.276 J-0.319
N5945 G1 Y125.724
N5950 G3 X30.724 Y125.405 I0.319
N5955 G1 X47.047
N5960 G2 X49.222 Y123.955 J-2.356
N5965 G3 X51.397 Y122.505 I2.175 J0.906
N5970 G1 X92.176
N5975 G3 X92.495 Y122.824 J0.319
N5980 G1 Y147.176
N5985 G3 X92.176 Y147.495 I-0.319
N5990 G1 X27.824
N5995 G3 X27.505 Y147.176 J-0.319
N6000 G1 Y122.824
N6005 G3 X27.824 Y122.505 I0.319
N6010 G1 X51.397
N6015 G2 X53.572 Y121.055 J-2.356
N6020 G3 X55.747 Y119.605 I2.175 J0.906
N6025 G1 X95.076
N6030 G3 X95.395 Y119.924 J0.319
N6035 G1 Y150.076
N6040 G3 X95.076 Y150.395 I-0.319
N6045 G1 X24.924
N6050 G3 X24.605 Y150.076 J-0.319
N6055 G1 Y119.924
N6060 G3 X24.924 Y119.605 I0.319
N6065 G1 X55.747
N6070 G2 X57.922 Y118.155 J-2.356
N6075 G3 X60.097 Y116.705 I2.175 J0.906
N6080 G1 X97.976
N6085 G3 X98.295 Y117.024 J0.319
N6090 G1 Y152.976
N6095 G3 X97.976 Y153.295 I-0.319
N6100 G1 X22.024
N6105 G3 X21.705 Y152.976 J-0.319
N6110 G1 Y117.024
N6115 G3 X22.024 Y116.705 I0.319
N6120 G1 X60.097
N6125 G2 X62.272 Y115.255 J-2.356
N6130 G3 X64.447 Y113.805 I2.175 J0.906
N6135 G1 X100.876
N6140 G3 X101.195 Y114.124 J0.319
N6145 G1 Y155.876
N6150 G3 X100.876 Y156.195 I-0.319
N6155 G1 X19.124
N6160 G3 X18.805 Y155.876 J-0.319
N6165 G1 Y114.124
N6170 G3 X19.124 Y113.805 I0.319
N6175 G1 X64.447
N6180 G2 X66.622 Y112.355 J-2.356
N6185 G3 X68.797 Y110.905 I2.175 J0.906
N6190 G1 X103.776
N6195 G3 X104.095 Y111.224 J0.319
N6200 G1 Y158.776
N6205 G3 X103.776 Y159.095 I-0.319
N6210 G1 X16.224
N6215 G3 X15.905 Y158.776 J-0.319
N6220 G1 Y111.224
N6225 G3 X16.224 Y110.905 I0.319
N6230 G1 X68.797
N6235 G2 X70.976 Y109.452 J-2.36
N6240 G3 X73.155 Y108 I2.179 J0.908
N6245 G1 X107
N6250 Y162
N6255 X13
N6260 Y108
N6265 X73.155
N6270 G3 X73.416 Y108.447 J0.3
N6275 G1 X70.42 Y113.777
N6280 X70.387 Y113.823
N6285 X70.347 Y113.863
N6290 X41.463 Y137.102
N6295 X41.443 Y137.123
N6300 X41.428 Y137.147
N6305 X41.201 Y137.634
N6310 X41.181 Y137.665
N6315 X41.153 Y137.689
N6320 X41.119 Y137.703
N6325 X41.082 Y137.708
N6330 X41.046 Y137.701
N6335 G3 X42.864 Y132.299 Z-20.313 I0.909 J-2.701 F233.3
N6340 X41.046 Y137.701 Z-20.625 I-0.909 J2.701
N6345 X42.864 Y132.299 Z-20.938 I0.909 J-2.701
N6350 X41.046 Y137.701 Z-21.251 I-0.909 J2.701
N6355 X42.864 Y132.299 Z-21.563 I0.909 J-2.701
N6360 X41.046 Y137.701 Z-21.876 I-0.909 J2.701
N6365 X39.105 Y135 Z-22 I0.909 J-2.701
N6370 G1 Y134.424 F700
N6375 G3 X39.424 Y134.105 I0.319
N6380 G1 X80.576
N6385 G3 X80.895 Y134.424 J0.319
N6390 G1 Y135.576
N6395 G3 X80.576 Y135.895 I-0.319
N6400 G1 X39.424
N6405 G3 X39.105 Y135.576 J-0.319
N6410 G1 Y135
N6415 G2 X37.94 Y133.259 I-1.883
N6420 G3 X38.347 Y131.205 I0.407 J-0.987
N6425 G1 X83.476
N6430 G3 X83.795 Y131.524 J0.319
N6435 G1 Y138.476
N6440 G3 X83.476 Y138.795 I-0.319
N6445 G1 X36.524
N6450 G3 X36.205 Y138.476 J-0.319
N6455 G1 Y131.524
N6460 G3 X36.524 Y131.205 I0.319
N6465 G1 X38.347
N6470 G2 X40.522 Y129.755 J-2.356
N6475 G3 X42.697 Y128.305 I2.175 J0.906
N6480 G1 X86.376
N6485 G3 X86.695 Y128.624 J0.319
N6490 G1 Y141.376
N6495 G3 X86.376 Y141.695 I-0.319
N6500 G1 X33.624
N6505 G3 X33.305 Y141.376 J-0.319
N6510 G1 Y128.624
N6515 G3 X33.624 Y128.305 I0.319
N6520 G1 X42.697
N6525 G2 X44.872 Y126.855 J-2.356
N6530 G3 X47.047 Y125.405 I2.175 J0.906
N6535 G1 X89.276
N6540 G3 X89.595 Y125.724 J0.319
N6545 G1 Y144.276
N6550 G3 X89.276 Y144.595 I-0.319
N6555 G1 X30.724
N6560 G3 X30.405 Y144.276 J-0.319
N6565 G1 Y125.724
N6570 G3 X30.724 Y125.405 I0.319
N6575 G1 X47.047
N6580 G2 X49.222 Y123.955 J-2.356
N6585 G3 X51.397 Y122.505 I2.175 J0.906
N6590 G1 X92.176
N6595 G3 X92.495 Y122.824 J0.319
N6600 G1 Y147.176
N6605 G3 X92.176 Y147.495 I-0.319
N6610 G1 X27.824
N6615 G3 X27.505 Y147.176 J-0.319
N6620 G1 Y122.824
N6625 G3 X27.824 Y122.505 I0.319
N6630 G1 X51.397
N6635 G2 X53.572 Y121.055 J-2.356
N6640 G3 X55.747 Y119.605 I2.175 J0.906
N6645 G1 X95.076
N6650 G3 X95.395 Y119.924 J0.319
N6655 G1 Y150.076
N6660 G3 X95.076 Y150.395 I-0.319
N6665 G1 X24.924
N6670 G3 X24.605 Y150.076 J-0.319
N6675 G1 Y119.924
N6680 G3 X24.924 Y119.605 I0.319
N6685 G1 X55.747
N6690 G2 X57.922 Y118.155 J-2.356
N6695 G3 X60.097 Y116.705 I2.175 J0.906
N6700 G1 X97.976
N6705 G3 X98.295 Y117.024 J0.319
N6710 G1 Y152.976
N6715 G3 X97.976 Y153.295 I-0.319
N6720 G1 X22.024
N6725 G3 X21.705 Y152.976 J-0.319
N6730 G1 Y117.024
N6735 G3 X22.024 Y116.705 I0.319
N6740 G1 X60.097
N6745 G2 X62.272 Y115.255 J-2.356
N6750 G3 X64.447 Y113.805 I2.175 J0.906
N6755 G1 X100.876
N6760 G3 X101.195 Y114.124 J0.319
N6765 G1 Y155.876
N6770 G3 X100.876 Y156.195 I-0.319
N6775 G1 X19.124
N6780 G3 X18.805 Y155.876 J-0.319
N6785 G1 Y114.124
N6790 G3 X19.124 Y113.805 I0.319
N6795 G1 X64.447
N6800 G2 X66.622 Y112.355 J-2.356
N6805 G3 X68.797 Y110.905 I2.175 J0.906
N6810 G1 X103.776
N6815 G3 X104.095 Y111.224 J0.319
N6820 G1 Y158.776
N6825 G3 X103.776 Y159.095 I-0.319
N6830 G1 X16.224
N6835 G3 X15.905 Y158.776 J-0.319
N6840 G1 Y111.224
N6845 G3 X16.224 Y110.905 I0.319
N6850 G1 X68.797
N6855 G2 X70.976 Y109.452 J-2.36
N6860 G3 X73.155 Y108 I2.179 J0.908
N6865 G1 X107
N6870 Y162
N6875 X13
N6880 Y108
N6885 X73.155
N6890 G3 X73.416 Y108.447 J0.3
N6895 G1 X70.42 Y113.777
N6900 X70.387 Y113.823
N6905 X70.347 Y113.863
N6910 X41.463 Y137.102
N6915 X41.443 Y137.123
N6920 X41.428 Y137.147
N6925 X41.201 Y137.634
N6930 X41.181 Y137.665
N6935 X41.153 Y137.689
N6940 X41.119 Y137.703
N6945 X41.082 Y137.708
N6950 X41.046 Y137.701
N6955 G3 X42.864 Y132.299 Z-22.313 I0.909 J-2.701 F233.3
N6960 X41.046 Y137.701 Z-22.625 I-0.909 J2.701
N6965 X42.864 Y132.299 Z-22.938 I0.909 J-2.701
N6970 X41.046 Y137.701 Z-23.251 I-0.909 J2.701
N6975 X42.864 Y132.299 Z-23.563 I0.909 J-2.701
N6980 X41.046 Y137.701 Z-23.876 I-0.909 J2.701
N6985 X39.105 Y135 Z-24 I0.909 J-2.701
N6990 G1 Y134.424 F700
N6995 G3 X39.424 Y134.105 I0.319
N7000 G1 X80.576
N7005 G3 X80.895 Y134.424 J0.319
N7010 G1 Y135.576
N7015 G3 X80.576 Y135.895 I-0.319
N7020 G1 X39.424
N7025 G3 X39.105 Y135.576 J-0.319
N7030 G1 Y135
N7035 G2 X37.94 Y133.259 I-1.883
N7040 G3 X38.347 Y131.205 I0.407 J-0.987
N7045 G1 X83.476
N7050 G3 X83.795 Y131.524 J0.319
N7055 G1 Y138.476
N7060 G3 X83.476 Y138.795 I-0.319
N7065 G1 X36.524
N7070 G3 X36.205 Y138.476 J-0.319
N7075 G1 Y131.524
N7080 G3 X36.524 Y131.205 I0.319
N7085 G1 X38.347
N7090 G2 X40.522 Y129.755 J-2.356
N7095 G3 X42.697 Y128.305 I2.175 J0.906
N7100 G1 X86.376
N7105 G3 X86.695 Y128.624 J0.319
N7110 G1 Y141.376
N7115 G3 X86.376 Y141.695 I-0.319
N7120 G1 X33.624
N7125 G3 X33.305 Y141.376 J-0.319
N7130 G1 Y128.624
N7135 G3 X33.624 Y128.305 I0.319
N7140 G1 X42.697
N7145 G2 X44.872 Y126.855 J-2.356
N7150 G3 X47.047 Y125.405 I2.175 J0.906
N7155 G1 X89.276
N7160 G3 X89.595 Y125.724 J0.319
N7165 G1 Y144.276
N7170 G3 X89.276 Y144.595 I-0.319
N7175 G1 X30.724
N7180 G3 X30.405 Y144.276 J-0.319
N7185 G1 Y125.724
N7190 G3 X30.724 Y125.405 I0.319
N7195 G1 X47.047
N7200 G2 X49.222 Y123.955 J-2.356
N7205 G3 X51.397 Y122.505 I2.175 J0.906
N7210 G1 X92.176
N7215 G3 X92.495 Y122.824 J0.319
N7220 G1 Y147.176
N7225 G3 X92.176 Y147.495 I-0.319
N7230 G1 X27.824
N7235 G3 X27.505 Y147.176 J-0.319
N7240 G1 Y122.824
N7245 G3 X27.824 Y122.505 I0.319
N7250 G1 X51.397
N7255 G2 X53.572 Y121.055 J-2.356
N7260 G3 X55.747 Y119.605 I2.175 J0.906
N7265 G1 X95.076
N7270 G3 X95.395 Y119.924 J0.319
N7275 G1 Y150.076
N7280 G3 X95.076 Y150.395 I-0.319
N7285 G1 X24.924
N7290 G3 X24.605 Y150.076 J-0.319
N7295 G1 Y119.924
N7300 G3 X24.924 Y119.605 I0.319
N7305 G1 X55.747
N7310 G2 X57.922 Y118.155 J-2.356
N7315 G3 X60.097 Y116.705 I2.175 J0.906
N7320 G1 X97.976
N7325 G3 X98.295 Y117.024 J0.319
N7330 G1 Y152.976
N7335 G3 X97.976 Y153.295 I-0.319
N7340 G1 X22.024
N7345 G3 X21.705 Y152.976 J-0.319
N7350 G1 Y117.024
N7355 G3 X22.024 Y116.705 I0.319
N7360 G1 X60.097
N7365 G2 X62.272 Y115.255 J-2.356
N7370 G3 X64.447 Y113.805 I2.175 J0.906
N7375 G1 X100.876
N7380 G3 X101.195 Y114.124 J0.319
N7385 G1 Y155.876
N7390 G3 X100.876 Y156.195 I-0.319
N7395 G1 X19.124
N7400 G3 X18.805 Y155.876 J-0.319
N7405 G1 Y114.124
N7410 G3 X19.124 Y113.805 I0.319
N7415 G1 X64.447
N7420 G2 X66.622 Y112.355 J-2.356
N7425 G3 X68.797 Y110.905 I2.175 J0.906
N7430 G1 X103.776
N7435 G3 X104.095 Y111.224 J0.319
N7440 G1 Y158.776
N7445 G3 X103.776 Y159.095 I-0.319
N7450 G1 X16.224
N7455 G3 X15.905 Y158.776 J-0.319
N7460 G1 Y111.224
N7465 G3 X16.224 Y110.905 I0.319
N7470 G1 X68.797
N7475 G2 X70.976 Y109.452 J-2.36
N7480 G3 X73.155 Y108 I2.179 J0.908
N7485 G1 X107
N7490 Y162
N7495 X13
N7500 Y108
N7505 X73.155
N7510 G3 X73.416 Y108.447 J0.3
N7515 G1 X70.42 Y113.777
N7520 X70.387 Y113.823
N7525 X70.347 Y113.863
N7530 X41.463 Y137.102
N7535 X41.443 Y137.123
N7540 X41.428 Y137.147
N7545 X41.201 Y137.634
N7550 X41.181 Y137.665
N7555 X41.153 Y137.689
N7560 X41.119 Y137.703
N7565 X41.082 Y137.708
N7570 X41.046 Y137.701
N7575 G3 X42.864 Y132.299 Z-24.313 I0.909 J-2.701 F233.3
N7580 X41.046 Y137.701 Z-24.625 I-0.909 J2.701
N7585 X42.864 Y132.299 Z-24.938 I0.909 J-2.701
N7590 X41.046 Y137.701 Z-25.251 I-0.909 J2.701
N7595 X42.864 Y132.299 Z-25.563 I0.909 J-2.701
N7600 X41.046 Y137.701 Z-25.876 I-0.909 J2.701
N7605 X39.105 Y135 Z-26 I0.909 J-2.701
N7610 G1 Y134.424 F700
N7615 G3 X39.424 Y134.105 I0.319
N7620 G1 X80.576
N7625 G3 X80.895 Y134.424 J0.319
N7630 G1 Y135.576
N7635 G3 X80.576 Y135.895 I-0.319
N7640 G1 X39.424
N7645 G3 X39.105 Y135.576 J-0.319
N7650 G1 Y135
N7655 G2 X37.94 Y133.259 I-1.883
N7660 G3 X38.347 Y131.205 I0.407 J-0.987
N7665 G1 X83.476
N7670 G3 X83.795 Y131.524 J0.319
N7675 G1 Y138.476
N7680 G3 X83.476 Y138.795 I-0.319
N7685 G1 X36.524
N7690 G3 X36.205 Y138.476 J-0.319
N7695 G1 Y131.524
N7700 G3 X36.524 Y131.205 I0.319
N7705 G1 X38.347
N7710 G2 X40.522 Y129.755 J-2.356
N7715 G3 X42.697 Y128.305 I2.175 J0.906
N7720 G1 X86.376
N7725 G3 X86.695 Y128.624 J0.319
N7730 G1 Y141.376
N7735 G3 X86.376 Y141.695 I-0.319
N7740 G1 X33.624
N7745 G3 X33.305 Y141.376 J-0.319
N7750 G1 Y128.624
N7755 G3 X33.624 Y128.305 I0.319
N7760 G1 X42.697
N7765 G2 X44.872 Y126.855 J-2.356
N7770 G3 X47.047 Y125.405 I2.175 J0.906
N7775 G1 X89.276
N7780 G3 X89.595 Y125.724 J0.319
N7785 G1 Y144.276
N7790 G3 X89.276 Y144.595 I-0.319
N7795 G1 X30.724
N7800 G3 X30.405 Y144.276 J-0.319
N7805 G1 Y125.724
N7810 G3 X30.724 Y125.405 I0.319
N7815 G1 X47.047
N7820 G2 X49.222 Y123.955 J-2.356
N7825 G3 X51.397 Y122.505 I2.175 J0.906
N7830 G1 X92.176
N7835 G3 X92.495 Y122.824 J0.319
N7840 G1 Y147.176
N7845 G3 X92.176 Y147.495 I-0.319
N7850 G1 X27.824
N7855 G3 X27.505 Y147.176 J-0.319
N7860 G1 Y122.824
N7865 G3 X27.824 Y122.505 I0.319
N7870 G1 X51.397
N7875 G2 X53.572 Y121.055 J-2.356
N7880 G3 X55.747 Y119.605 I2.175 J0.906
N7885 G1 X95.076
N7890 G3 X95.395 Y119.924 J0.319
N7895 G1 Y150.076
N7900 G3 X95.076 Y150.395 I-0.319
N7905 G1 X24.924
N7910 G3 X24.605 Y150.076 J-0.319
N7915 G1 Y119.924
N7920 G3 X24.924 Y119.605 I0.319
N7925 G1 X55.747
N7930 G2 X57.922 Y118.155 J-2.356
N7935 G3 X60.097 Y116.705 I2.175 J0.906
N7940 G1 X97.976
N7945 G3 X98.295 Y117.024 J0.319
N7950 G1 Y152.976
N7955 G3 X97.976 Y153.295 I-0.319
N7960 G1 X22.024
N7965 G3 X21.705 Y152.976 J-0.319
N7970 G1 Y117.024
N7975 G3 X22.024 Y116.705 I0.319
N7980 G1 X60.097
N7985 G2 X62.272 Y115.255 J-2.356
N7990 G3 X64.447 Y113.805 I2.175 J0.906
N7995 G1 X100.876
N8000 G3 X101.195 Y114.124 J0.319
N8005 G1 Y155.876
N8010 G3 X100.876 Y156.195 I-0.319
N8015 G1 X19.124
N8020 G3 X18.805 Y155.876 J-0.319
N8025 G1 Y114.124
N8030 G3 X19.124 Y113.805 I0.319
N8035 G1 X64.447
N8040 G2 X66.622 Y112.355 J-2.356
N8045 G3 X68.797 Y110.905 I2.175 J0.906
N8050 G1 X103.776
N8055 G3 X104.095 Y111.224 J0.319
N8060 G1 Y158.776
N8065 G3 X103.776 Y159.095 I-0.319
N8070 G1 X16.224
N8075 G3 X15.905 Y158.776 J-0.319
N8080 G1 Y111.224
N8085 G3 X16.224 Y110.905 I0.319
N8090 G1 X68.797
N8095 G2 X70.976 Y109.452 J-2.36
N8100 G3 X73.155 Y108 I2.179 J0.908
N8105 G1 X107
N8110 Y162
N8115 X13
N8120 Y108
N8125 X73.155
N8130 G3 X73.348 Y108.53 J0.3
N8135 G1 X44.32 Y132.932
N8140 G2 X44.27 Y133.337 I0.193 J0.23
N8145 G3 X39.64 Y136.663 Z-26.313 I-2.315 J1.663 F233.3
N8150 X44.27 Y133.337 Z-26.625 I2.315 J-1.663
N8155 X39.64 Y136.663 Z-26.938 I-2.315 J1.663
N8160 X39.105 Y135 Z-27 I2.315 J-1.663
N8165 G1 Y134.424 F700
N8170 G3 X39.424 Y134.105 I0.319
N8175 G1 X80.576
N8180 G3 X80.895 Y134.424 J0.319
N8185 G1 Y135.576
N8190 G3 X80.576 Y135.895 I-0.319
N8195 G1 X39.424
N8200 G3 X39.105 Y135.576 J-0.319
N8205 G1 Y135
N8210 G2 X37.94 Y133.259 I-1.883
N8215 G3 X38.347 Y131.205 I0.407 J-0.987
N8220 G1 X83.476
N8225 G3 X83.795 Y131.524 J0.319
N8230 G1 Y138.476
N8235 G3 X83.476 Y138.795 I-0.319
N8240 G1 X36.524
N8245 G3 X36.205 Y138.476 J-0.319
N8250 G1 Y131.524
N8255 G3 X36.524 Y131.205 I0.319
N8260 G1 X38.347
N8265 G2 X40.522 Y129.755 J-2.356
N8270 G3 X42.697 Y128.305 I2.175 J0.906
N8275 G1 X86.376
N8280 G3 X86.695 Y128.624 J0.319
N8285 G1 Y141.376
N8290 G3 X86.376 Y141.695 I-0.319
N8295 G1 X33.624
N8300 G3 X33.305 Y141.376 J-0.319
N8305 G1 Y128.624
N8310 G3 X33.624 Y128.305 I0.319
N8315 G1 X42.697
N8320 G2 X44.872 Y126.855 J-2.356
N8325 G3 X47.047 Y125.405 I2.175 J0.906
N8330 G1 X89.276
N8335 G3 X89.595 Y125.724 J0.319
N8340 G1 Y144.276
N8345 G3 X89.276 Y144.595 I-0.319
N8350 G1 X30.724
N8355 G3 X30.405 Y144.276 J-0.319
N8360 G1 Y125.724
N8365 G3 X30.724 Y125.405 I0.319
N8370 G1 X47.047
N8375 G2 X49.222 Y123.955 J-2.356
N8380 G3 X51.397 Y122.505 I2.175 J0.906
N8385 G1 X92.176
N8390 G3 X92.495 Y122.824 J0.319
N8395 G1 Y147.176
N8400 G3 X92.176 Y147.495 I-0.319
N8405 G1 X27.824
N8410 G3 X27.505 Y147.176 J-0.319
N8415 G1 Y122.824
N8420 G3 X27.824 Y122.505 I0.319
N8425 G1 X51.397
N8430 G2 X53.572 Y121.055 J-2.356
N8435 G3 X55.747 Y119.605 I2.175 J0.906
N8440 G1 X95.076
N8445 G3 X95.395 Y119.924 J0.319
N8450 G1 Y150.076
N8455 G3 X95.076 Y150.395 I-0.319
N8460 G1 X24.924
N8465 G3 X24.605 Y150.076 J-0.319
N8470 G1 Y119.924
N8475 G3 X24.924 Y119.605 I0.319
N8480 G1 X55.747
N8485 G2 X57.922 Y118.155 J-2.356
N8490 G3 X60.097 Y116.705 I2.175 J0.906

GEKNIPT IVM MAX TEKENS
Je hebt niet voldoende permissies om de bijlagen van dit bericht te bekijken.

Gebruikersavatar
andrefc101
Donateur
Berichten: 2186
Lid geworden op: 26 dec 2007 08:39
Locatie: Bergen op Zoom
Contacteer:

Re: Werkstuk inladen en bed formaat instellen

Bericht door andrefc101 » 20 sep 2019 18:23

Jasper schreef:
20 sep 2019 11:42
Line 157 start met N765

Doosje 120x80x32.cnc.txt

Code: Selecteer alles

%
(Doosje 120x80x32)

N55 G43 Z8

GEKNIPT IVM MAX TEKENS
Je zet hier al met G43 toollengte compensatie aan, wanneer je die niet gebruikt zou ik die maar uitzetten... kunnen anders rare dingen gebeuren al je tooltable niet netjes is...

Jasper
Berichten: 496
Lid geworden op: 05 jul 2019 09:39
Locatie: Kedichem
Contacteer:

Re: Werkstuk inladen en bed formaat instellen

Bericht door Jasper » 20 sep 2019 18:26

Dankje Andre, die haal ik er morgen als eerste even uit.
Als het dan lukt zal ik de tool inmeten en nog eens proberen.

Als ik het goed begrepen heb kan je alleen een tool wisselen dmv inmeten toch?
Nu staat er inderdaad een andere tool in volgens de gele tekst bovenin dan ik wil gebruiken.
Ik dacht dat de software die pas zou wissel na het starten van het bestand, daarom komt hij naar voren dacht ik.

Maar zoals inmiddels wel duidelijk, haast niets bij Eding gaat zoals ik dacht.

Gebruikersavatar
andrefc101
Donateur
Berichten: 2186
Lid geworden op: 26 dec 2007 08:39
Locatie: Bergen op Zoom
Contacteer:

Re: Werkstuk inladen en bed formaat instellen

Bericht door andrefc101 » 20 sep 2019 18:31

Jasper schreef:
20 sep 2019 18:26
Dankje Andre, die haal ik er morgen als eerste even uit.
Als het dan lukt zal ik de tool inmeten en nog eens proberen.

Als ik het goed begrepen heb kan je alleen een tool wisselen dmv inmeten toch?
Nu staat er inderdaad een andere tool in volgens de gele tekst bovenin dan ik wil gebruiken.
Ik dacht dat de software die pas zou wissel na het starten van het bestand, daarom komt hij naar voren dacht ik.

Maar zoals inmiddels wel duidelijk, haast niets bij Eding gaat zoals ik dacht.
Heeft niets met Eding te maken, maar met het gebruik van bepaalde G-codes.
Wanneer je geen toollengte compensatie gebruikt, moet je zorgen dat die code niet in je bestand staat! Controleer dus of G43 niet an staat (anders met G49) uitzetten.
Controleer ook altijd de header van je G-Code bestand, en kijkt of deze geen rare dingen bevat. Enige kennis van wat welke g- of m- code doet is eigelijk een must! Dit is niet moeilijk te leren, gewoon lezen wat deze verschillende codes doen.
En vervolgens zorgen dat je pp geen code uitspuwt die je niet wilt! Altijd schone code gebruiken, voorkomt een hoop ellende!

Jasper
Berichten: 496
Lid geworden op: 05 jul 2019 09:39
Locatie: Kedichem
Contacteer:

Re: Werkstuk inladen en bed formaat instellen

Bericht door Jasper » 21 sep 2019 09:34

Tool length calibration opnieuw ingesteld en gemeten, geen resultaat. Nu line 707.
Regel eruit, fout op line 404.

Nulpunt bepaalt op het bed en dan 0 gewijzigd in -33 en dat werkt wel.

Zal er nog eens goed over moeten nadenken. Nu eerst mijn eerste werkstuk maken met de CPU5B.

https://youtu.be/BKz2dFtr5_4

Gebruikersavatar
audiomanics
Donateur
Berichten: 5175
Lid geworden op: 28 feb 2007 09:31
Locatie: Appelscha
Contacteer:

Re: Werkstuk inladen en bed formaat instellen

Bericht door audiomanics » 21 sep 2019 10:09

is je machine-definitie in eding misschien te krap? Met name de Z.. Die kan na het homen een aantal mm naar boven maar een heel eind naar beneden. Meestal zo ver dat de klembus de tafel raakt. Dan kan je er zelfs de kleinste freesjes in zetten.
Omdat ik geen toolchanger heb doe ik zelf helemaal niets met tooltables, toolnumbers, radiuscompensatie en toollength.. Gewoon zorgen dat de frees ver genoeg uit steekt om door het materiaal te gaan of zover als nodig om de ruimte uit te kunnen frezen zonder dat de klembus het materiaal raakt. Al mijn tools hebben nummer 1 en staan in de tabel als 0..
De freesdiameter is al gedefinieerd in je CAM-software. Die heeft daar ook al rekening mee gehouden met het aanmaken van de toolpaths, dus dan hoeft Eding daar zelf niet meer mee te doen.. En ja, dan kan je met het grootste gemak je frees dwars door je bed steken, maar dat is een kwestie van zelf goed opletten.
De bovenkant van het materiaal is nul en de onderkant min-de-dikte.. Om uitsparingen te frezen die bovenkant gerelateerd zijn (bijv een pocket met een diepte van 20mm) nul ik de frees op de bovenkant, door 'm juist zover naar beneden te joggen dat de frees het licht er onderdoor net afsluit. Voor onderkant gerelateerde bewerkingen (zoals gaten die door en door moeten worden) meet ik de oppervlakte van het bed met de toolsetter, en dan ga ik bij hout 1/20 over het bed. Als ik aluminium toolingplate ga frezen meet ik de bovenkant met het licht onder de frees. Die methode is dusdanig zuiver dat een pocket van 1,00 mm ook 1,00 mm meet na het frezen en dat als ik er gaten in frees dat het materiaal weg is, maar de beschermfolie op de onderkant nog blijft zitten.

Kees
<klik>... euh..test... 123.... einde test... uit.<klik>

Jasper
Berichten: 496
Lid geworden op: 05 jul 2019 09:39
Locatie: Kedichem
Contacteer:

Re: Werkstuk inladen en bed formaat instellen

Bericht door Jasper » 21 sep 2019 11:21

Hoi Kees,

Dat Z is inderdaad krap. Als ik home en de omhoog ga dan naar net niet vaste aanslag kan ik 74mm omlaag en dan ook net niet de vaste aanslag raken. In Eding staat ook 74mm ingesteld.

Gebruikersavatar
audiomanics
Donateur
Berichten: 5175
Lid geworden op: 28 feb 2007 09:31
Locatie: Appelscha
Contacteer:

Re: Werkstuk inladen en bed formaat instellen

Bericht door audiomanics » 21 sep 2019 15:42

Ik denk dat hier de crux zit.. je kan namelijk vanaf je homepunt een stukje omhoog. Stel dat die afstand 10mm is. Dan moet je in Eding voor de positieve kant 10 invullen en als je totale slag 74 mm is, dan is de negatieve waarde -64... Je frees moet ook wel het bed kunnen raken. Steek hem zover uit dat je in de laagst stand het bed raakt. Liefst nog als de spindel 1mm boven het laagste punt staat..
Kees
<klik>... euh..test... 123.... einde test... uit.<klik>

Plaats reactie