Welding day in the life ...

Gewoon even offtopic praten over van alles en nog wat.

Moderator: Moderators

Gebruikersavatar
Sven
Berichten: 5985
Lid geworden op: 24 sep 2008 09:13
Locatie: Arnhem
Contacteer:

Re: Welding day in the life ...

Bericht door Sven »

If you want to take people on a journey, you must lead.
350 kilo 1250x1250 aluminium portaalfrees:
http://cnczone.nl/viewtopic.php?f=8&t=13039
Beginnen met CNC? Ontwerpen, bouwen, of toch kopen?
http://cnczone.nl/viewtopic.php?f=8&t=15481
Gebruikersavatar
Weld ON
Berichten: 25
Lid geworden op: 07 feb 2021 02:48

Re: Welding day in the life ...

Bericht door Weld ON »

To : Kjelt ... ?

To: Serum , thanks mate , you hit all points ... People like to watch but they dont know how much of work/time and money you need to put in to one video .. :) Like you said ... guys you dont have to do anything , just ingore it but if you like what you see just leave comment :)

Some of parts for project you have to buy or you can make them if you have oportunity ... and i do .. so why not...So be honest 6ppl helping me

with my CNC projects , and i can just say Thank you very much guys .. :)

Sure Serun more video will come about CNC and welding ,steb by step ,just stay tune , drop me on your youtube and you will get notification , if you already did then big thanks 2 u ... And thanks for your post ... great ..lov it

To : Ballegooijen :)

To: kawarider ... Thanks
Gebruikersavatar
serum
Berichten: 5396
Lid geworden op: 08 mar 2008 20:37
Locatie: Zwolle

Re: Welding day in the life ...

Bericht door serum »

Subbed.. Points for you for being so sportive.

Looking forward to your next upload. I can't seem to find time to upload many movies. I know it's a lot of work to put the movies together.
Gebruikersavatar
DaBit
Donateur
Berichten: 11015
Lid geworden op: 05 dec 2012 13:48
Locatie: Oss

Re: Welding day in the life ...

Bericht door DaBit »

Ah, radiators....

Creating radiators for my SV650-to-allroad conversion project out of old car heater radiators was the first time I tried aluminium welding. I don't even have a 'real' AC welder, just a DC TIG with a few modifications.

It was hard. That dirty and thin aluminium does not make a very good first aluminium welding project. I managed to make holes, I spewed droplets of aluminium around, but in the end it worked out quite well.

Afbeelding

And then the distribution piping. I thought I had done the hardest part, but welding round pipes with small diameter turned out to be not so easy either. Mind you, I still had only a quarter of a bottle or argon experience welding aluminium.

Afbeelding

It did work out well though.

Afbeelding


Brings back good memories. Thanks for that!
De belangrijkste wet in de wetenschap: 'hoe minder efficient en hoe meer herrie, hoe leuker het is'
Gebruikersavatar
Weld ON
Berichten: 25
Lid geworden op: 07 feb 2021 02:48

Re: Welding day in the life ...

Bericht door Weld ON »

Nice job mate, if dont do every day as me then for sure can be hard , so big respect you made it .. :)
Gebruikersavatar
Weld ON
Berichten: 25
Lid geworden op: 07 feb 2021 02:48

Re: Welding day in the life ...

Bericht door Weld ON »

Part of other projecs now im building 2 welding Tables , 1.5x0.8m and 2x1m / 15mm ,

step by step how to point and start to build your own Welding table .. :)

https://youtu.be/mEBxAMMr5HA

Afbeelding
Gebruikersavatar
Weld ON
Berichten: 25
Lid geworden op: 07 feb 2021 02:48

Re: Welding day in the life ...

Bericht door Weld ON »

Most funny thing was when i forgot to remove tape with foam what i can say my bad ..

You can se my prototype of rottary positioner and for welding i was using REHM AC/DC 180A .

https://youtu.be/wQ7zbzA1vts

Afbeelding
Gebruikersavatar
Weld ON
Berichten: 25
Lid geworden op: 07 feb 2021 02:48

Re: Welding day in the life ...

Bericht door Weld ON »

If you will watch whole video then you can learn How to PERFECTLY Sharpen Tungsten for TIG Welding easy and fast way .

Do not forget to SUBSCRIBE please and TANKS.. :)

https://www.youtube.com/watch?v=NBS09lvLwtQ&t=1s

Afbeelding
Gebruikersavatar
Weld ON
Berichten: 25
Lid geworden op: 07 feb 2021 02:48

Re: Welding day in the life ...

Bericht door Weld ON »

Hello everyone , this is jus part of my standard Welding day in the life.
Check my other Welding or CNC video .. Thanks for Watching.

https://youtu.be/slZ_j1BWh7M

Afbeelding
Gebruikersavatar
Ballegooijen
Donateur
Berichten: 4913
Lid geworden op: 20 sep 2016 15:45
Locatie: 's-Gravendeel
Contacteer:

Re: Welding day in the life ...

Bericht door Ballegooijen »

Moet die reclame nu steeds? :oops: :oops:
Kennis vermenigvuldigt zich alleen als je het deelt.
https://www.Baldas.nl
Gebruikersavatar
serum
Berichten: 5396
Lid geworden op: 08 mar 2008 20:37
Locatie: Zwolle

Re: Welding day in the life ...

Bericht door serum »

Ik denk stellig dat jij meer euro's verdient aan dit forum dan hij. Niemand is roomser dan de Paus.
Gebruikersavatar
andrefc101
Donateur
Berichten: 3702
Lid geworden op: 26 dec 2007 08:39
Locatie: Bergen op Zoom
Contacteer:

Re: Welding day in the life ...

Bericht door andrefc101 »

Als alles eraf moet wat niet relevant of interessant is, dat wordt dit een erg leeg forum….. 😏
Gebruikersavatar
Kars-cnc
Donateur
Berichten: 1750
Lid geworden op: 07 okt 2015 05:33
Locatie: Heerde (Gelderland)

Re: Welding day in the life ...

Bericht door Kars-cnc »

Hmm, ik stoor mij ook wel een beetje aan iemand die het forum uitsluitend als reclame middel voor eigen belang gebruikt. Dit helemaal los van wat er eventueel mee verdient wordt.

Aan de andere kant, je hoeft het niet te lezen natuurlijk. Er zijn inderdaad vele topics die nergens over gaan maar wel ruimte en aandacht op het forum nemen...
Gebruikersavatar
andrefc101
Donateur
Berichten: 3702
Lid geworden op: 26 dec 2007 08:39
Locatie: Bergen op Zoom
Contacteer:

Re: Welding day in the life ...

Bericht door andrefc101 »

Kars-cnc schreef: 30 mei 2021 21:14 Aan de andere kant, je hoeft het niet te lezen natuurlijk. Er zijn inderdaad vele topics die nergens over gaan maar wel ruimte en aandacht op het forum nemen...
Dat bedoel ik, en waarschijnlijk zijn er toch ook wel forumleden die lassen interessant vinden. Laat gaan……
Plaats reactie